Charged enclosed by the sphere
$begingroup$
I'm reviewing the book "Conquering the Physics GRE" for my upcoming Physics GRE. I came across this problem which I'm having trouble with understanding. In particular, I understand the solution that the author provides but I don't understand what is wrong with my approach.
Q. The Electric field inside a sphere of radius $R$ is given by $E = E_0 z^2 hat{textbf{z}}$. What is the total charge of the sphere ?
The authors approach involving taking the divergence of the electric field to get the charge density and then integrating the density over the volume of the sphere to get charged enclosed, which in their case turns out to be $0$.
But we can also just use a concentric sphere of radius $r$ ($0 < r le R$) as a Gaussian surface and just use the integral form of Maxwell's equation to calculate the charge enclosed.
$$ oint limits_{S} vec{E} cdot dvec{S} = frac{Q_{enc}}{epsilon_0} $$
Since the area vector points in the radial direction, if we assume it makes an angle $theta$ with the Electric Field vector, and given $z = r cos(theta)$, we have
$$ Q_{enc} = epsilon_0 int limits_{0}^{pi} int limits_{0}^{2pi} E_0 r^2 cos^2(theta) r^2 sin(theta) dtheta dphi $$
$$ Q_{enc} = frac{4 pi epsilon_0 E_0}{3} r^4 $$
If we want the charge enclosed by the sphere, we just set $r = R$, so we get
$$ Q = frac{4 pi epsilon_0 E_0}{3} R^4 $$
which isn't zero.
I'm having trouble figuring out where I'm going wrong. Any suggestions appreciated.
electrostatics gauss-law maxwell-equations
asked 5 hours ago
timoneotimoneo
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
I'm reviewing the book "Conquering the Physics GRE" for my upcoming Physics GRE. I came across this problem which I'm having trouble with understanding. In particular, I understand the solution that the author provides but I don't understand what is wrong with my approach.
Q. The Electric field inside a sphere of radius $R$ is given by $E = E_0 z^2 hat{textbf{z}}$. What is the total charge of the sphere ?
The authors approach involving taking the divergence of the electric field to get the charge density and then integrating the density over the volume of the sphere to get charged enclosed, which in their case turns out to be $0$.
But we can also just use a concentric sphere of radius $r$ ($0 < r le R$) as a Gaussian surface and just use the integral form of Maxwell's equation to calculate the charge enclosed.
$$ oint limits_{S} vec{E} cdot dvec{S} = frac{Q_{enc}}{epsilon_0} $$
Since the area vector points in the radial direction, if we assume it makes an angle $theta$ with the Electric Field vector, and given $z = r cos(theta)$, we have
$$ Q_{enc} = epsilon_0 int limits_{0}^{pi} int limits_{0}^{2pi} E_0 r^2 cos^2(theta) r^2 sin(theta) dtheta dphi $$
$$ Q_{enc} = frac{4 pi epsilon_0 E_0}{3} r^4 $$
If we want the charge enclosed by the sphere, we just set $r = R$, so we get
$$ Q = frac{4 pi epsilon_0 E_0}{3} R^4 $$
which isn't zero.
I'm having trouble figuring out where I'm going wrong. Any suggestions appreciated.
electrostatics gauss-law maxwell-equations
asked 5 hours ago
timoneotimoneo
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
I'm reviewing the book "Conquering the Physics GRE" for my upcoming Physics GRE. I came across this problem which I'm having trouble with understanding. In particular, I understand the solution that the author provides but I don't understand what is wrong with my approach.
Q. The Electric field inside a sphere of radius $R$ is given by $E = E_0 z^2 hat{textbf{z}}$. What is the total charge of the sphere ?
The authors approach involving taking the divergence of the electric field to get the charge density and then integrating the density over the volume of the sphere to get charged enclosed, which in their case turns out to be $0$.
But we can also just use a concentric sphere of radius $r$ ($0 < r le R$) as a Gaussian surface and just use the integral form of Maxwell's equation to calculate the charge enclosed.
$$ oint limits_{S} vec{E} cdot dvec{S} = frac{Q_{enc}}{epsilon_0} $$
Since the area vector points in the radial direction, if we assume it makes an angle $theta$ with the Electric Field vector, and given $z = r cos(theta)$, we have
$$ Q_{enc} = epsilon_0 int limits_{0}^{pi} int limits_{0}^{2pi} E_0 r^2 cos^2(theta) r^2 sin(theta) dtheta dphi $$
$$ Q_{enc} = frac{4 pi epsilon_0 E_0}{3} r^4 $$
If we want the charge enclosed by the sphere, we just set $r = R$, so we get
$$ Q = frac{4 pi epsilon_0 E_0}{3} R^4 $$
which isn't zero.
I'm having trouble figuring out where I'm going wrong. Any suggestions appreciated.
electrostatics gauss-law maxwell-equations
asked 5 hours ago
timoneotimoneo
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
I'm reviewing the book "Conquering the Physics GRE" for my upcoming Physics GRE. I came across this problem which I'm having trouble with understanding. In particular, I understand the solution that the author provides but I don't understand what is wrong with my approach.
Q. The Electric field inside a sphere of radius $R$ is given by $E = E_0 z^2 hat{textbf{z}}$. What is the total charge of the sphere ?
The authors approach involving taking the divergence of the electric field to get the charge density and then integrating the density over the volume of the sphere to get charged enclosed, which in their case turns out to be $0$.
But we can also just use a concentric sphere of radius $r$ ($0 < r le R$) as a Gaussian surface and just use the integral form of Maxwell's equation to calculate the charge enclosed.
$$ oint limits_{S} vec{E} cdot dvec{S} = frac{Q_{enc}}{epsilon_0} $$
Since the area vector points in the radial direction, if we assume it makes an angle $theta$ with the Electric Field vector, and given $z = r cos(theta)$, we have
$$ Q_{enc} = epsilon_0 int limits_{0}^{pi} int limits_{0}^{2pi} E_0 r^2 cos^2(theta) r^2 sin(theta) dtheta dphi $$
$$ Q_{enc} = frac{4 pi epsilon_0 E_0}{3} r^4 $$
If we want the charge enclosed by the sphere, we just set $r = R$, so we get
$$ Q = frac{4 pi epsilon_0 E_0}{3} R^4 $$
which isn't zero.
I'm having trouble figuring out where I'm going wrong. Any suggestions appreciated.
electrostatics gauss-law maxwell-equations
electrostatics gauss-law maxwell-equations
asked 5 hours ago
timoneotimoneo
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
timoneotimoneo
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
timoneotimoneo
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
timoneotimoneo
233
asked 5 hours ago
timoneotimoneo
233
233
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
timoneo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
I think you forgot to account for $mathbf{hat{z}}$
Let $mathbf{hat{r}}$ be the normal to the surface of our sphere. If you take the route of integrating the electric field over the surface of the sphere that contains the charge, then you will be evaluating the following quantity.
$z^2 mathbf{hat{z}}.mathbf{hat{r}}=z^2 mathbf{hat{z}}.mathbf{r}/r=z^2, z/r=z^3/r$
So you will be integrating $z^3$ over the surface of the sphere centered on the origin. Since $z^3$ is an odd function the integral will vanish.
answered 5 hours ago
CryoCryo
39815
$endgroup$
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
1
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
1
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
add a comment |
$begingroup$
There is also a nice geometrical argument for this. Since the field is $vec E=z^2hat z$, the fields lines always point along $+hat z$ and the magnitude of the field does not depend on the position in the $xy$-plane. As a result, every field line that enters the sphere must also exit the sphere, so the net flux must be $0$.
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "151"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
timoneo is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphysics.stackexchange.com%2fquestions%2f464265%2fcharged-enclosed-by-the-sphere%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
I think you forgot to account for $mathbf{hat{z}}$
Let $mathbf{hat{r}}$ be the normal to the surface of our sphere. If you take the route of integrating the electric field over the surface of the sphere that contains the charge, then you will be evaluating the following quantity.
$z^2 mathbf{hat{z}}.mathbf{hat{r}}=z^2 mathbf{hat{z}}.mathbf{r}/r=z^2, z/r=z^3/r$
So you will be integrating $z^3$ over the surface of the sphere centered on the origin. Since $z^3$ is an odd function the integral will vanish.
answered 5 hours ago
CryoCryo
39815
$endgroup$
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
1
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
1
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
add a comment |
$begingroup$
I think you forgot to account for $mathbf{hat{z}}$
Let $mathbf{hat{r}}$ be the normal to the surface of our sphere. If you take the route of integrating the electric field over the surface of the sphere that contains the charge, then you will be evaluating the following quantity.
$z^2 mathbf{hat{z}}.mathbf{hat{r}}=z^2 mathbf{hat{z}}.mathbf{r}/r=z^2, z/r=z^3/r$
So you will be integrating $z^3$ over the surface of the sphere centered on the origin. Since $z^3$ is an odd function the integral will vanish.
answered 5 hours ago
CryoCryo
39815
$endgroup$
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
1
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
1
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
add a comment |
$begingroup$
I think you forgot to account for $mathbf{hat{z}}$
Let $mathbf{hat{r}}$ be the normal to the surface of our sphere. If you take the route of integrating the electric field over the surface of the sphere that contains the charge, then you will be evaluating the following quantity.
$z^2 mathbf{hat{z}}.mathbf{hat{r}}=z^2 mathbf{hat{z}}.mathbf{r}/r=z^2, z/r=z^3/r$
So you will be integrating $z^3$ over the surface of the sphere centered on the origin. Since $z^3$ is an odd function the integral will vanish.
answered 5 hours ago
CryoCryo
39815
$endgroup$
I think you forgot to account for $mathbf{hat{z}}$
Let $mathbf{hat{r}}$ be the normal to the surface of our sphere. If you take the route of integrating the electric field over the surface of the sphere that contains the charge, then you will be evaluating the following quantity.
$z^2 mathbf{hat{z}}.mathbf{hat{r}}=z^2 mathbf{hat{z}}.mathbf{r}/r=z^2, z/r=z^3/r$
So you will be integrating $z^3$ over the surface of the sphere centered on the origin. Since $z^3$ is an odd function the integral will vanish.
answered 5 hours ago
CryoCryo
39815
answered 5 hours ago
CryoCryo
39815
answered 5 hours ago
CryoCryo
39815
answered 5 hours ago
CryoCryo
39815
39815
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
1
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
1
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
add a comment |
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
1
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
1
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
Thanks! Indeed I forgot the $hat{z}$. FYI, I marked your answer as correct, but I don't have enough reputation to publicly upvote you, so just thanking you via this comment.
$endgroup$
– timoneo
5 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
$begingroup$
I thought this question was fascinating. I don't understand where the minus sign appears to make the function odd. Shouldn't ^z and ^r point in the same direction over the entire surface of the sphere, giving a positive dot product over the entire surface?
$endgroup$
– lamplamp
4 hours ago
1
1
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
$begingroup$
@timoneo: good question. Glad I could help
$endgroup$
– Cryo
4 hours ago
1
1
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
@lamplamp: $mathbf{hat{z}}$ does point in the same direction at all points, but $mathbf{hat{r}}$ does not since it is normal and points out of the sphere. If this sphere was Earth, $mathbf{hat{r}}$ would point in the direction of the rocket taking off the Earth and flying to space, so on north pole $mathbf{hat{r}}$ points "up", whilst on south pole it points "down".
$endgroup$
– Cryo
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
$begingroup$
Thanks, when I read the question, I assumed that z was referencing a radial coordinate as a dummy variable to distinguish from r. From the thread here, I now believe that z was chosen to as standard Cartesian, which makes perfect sense about the function being odd.
$endgroup$
– lamplamp
4 hours ago
add a comment |
$begingroup$
There is also a nice geometrical argument for this. Since the field is $vec E=z^2hat z$, the fields lines always point along $+hat z$ and the magnitude of the field does not depend on the position in the $xy$-plane. As a result, every field line that enters the sphere must also exit the sphere, so the net flux must be $0$.
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
$endgroup$
add a comment |
$begingroup$
There is also a nice geometrical argument for this. Since the field is $vec E=z^2hat z$, the fields lines always point along $+hat z$ and the magnitude of the field does not depend on the position in the $xy$-plane. As a result, every field line that enters the sphere must also exit the sphere, so the net flux must be $0$.
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
$endgroup$
add a comment |
$begingroup$
There is also a nice geometrical argument for this. Since the field is $vec E=z^2hat z$, the fields lines always point along $+hat z$ and the magnitude of the field does not depend on the position in the $xy$-plane. As a result, every field line that enters the sphere must also exit the sphere, so the net flux must be $0$.
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
$endgroup$
There is also a nice geometrical argument for this. Since the field is $vec E=z^2hat z$, the fields lines always point along $+hat z$ and the magnitude of the field does not depend on the position in the $xy$-plane. As a result, every field line that enters the sphere must also exit the sphere, so the net flux must be $0$.
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
edited 2 hours ago
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
answered 3 hours ago
ZeroTheHeroZeroTheHero
20.5k53260
20.5k53260
add a comment |
add a comment |
timoneo is a new contributor. Be nice, and check out our Code of Conduct.
timoneo is a new contributor. Be nice, and check out our Code of Conduct.
timoneo is a new contributor. Be nice, and check out our Code of Conduct.
timoneo is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Physics Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphysics.stackexchange.com%2fquestions%2f464265%2fcharged-enclosed-by-the-sphere%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
