How to find if FC-Switch using port-zoning or not Brocade FC 300
0
I have to replace a HBA on RedHat5.3 due to card failure. A tech guy asked me that "Check your FC-Switch Zoning Type of Port Zoning or not? , because if host accessed by WWNN, you'll need to update FC-switch config" Is this below result on Brocade FC 300 showing Port-Zoning configuration or not? fcsw03:admin> switchshow switchName: xxxxx switchType: 71.2 switchState: Online switchMode: Native switchRole: Principal switchDomain: 1 switchId: fffc01 switchWwn: 10:00xxxxxxxxxxxxx zoning: ON (zones) switchBeacon: OFF Index Port Address Media Speed State Proto ============================================== 0 0 011700 id N8 No_Light FC 1 1 011500 id N8 Online FC F-Port 21:00:00:24:xxxxxxxxxxxx 2 2 ...