Accessing PWD in C++ Code
In Qt Creator in the Projects Build Settings, you can set environment variables so that once you're done your system does not retain the env vars that were set while developing. The environment variable I have would contain the path of the developer's code. I would like to not have each developer have to input this value. I have read that there's a .pro.shared that can contain this information, however since the environment variable will point to the user's code directory and will be different for each user, it would not work for this.
What is the best way to do this?
I tried variations of the following:
MyProject.pro
DEFINES += MY_VAR=$PWD
main.cpp
#ifdef MY_VAR
qDebug() << "printing value: " << QString(MY_VAR);
#endif
Any suggestions are welcomed. The solution I'm looking for doesn't have to be a .pro file edit, as long as it is something that can be version controlled.
Not a duplicate question because...There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
c++ qt qt-creator
add a comment |
In Qt Creator in the Projects Build Settings, you can set environment variables so that once you're done your system does not retain the env vars that were set while developing. The environment variable I have would contain the path of the developer's code. I would like to not have each developer have to input this value. I have read that there's a .pro.shared that can contain this information, however since the environment variable will point to the user's code directory and will be different for each user, it would not work for this.
What is the best way to do this?
I tried variations of the following:
MyProject.pro
DEFINES += MY_VAR=$PWD
main.cpp
#ifdef MY_VAR
qDebug() << "printing value: " << QString(MY_VAR);
#endif
Any suggestions are welcomed. The solution I'm looking for doesn't have to be a .pro file edit, as long as it is something that can be version controlled.
Not a duplicate question because...There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
c++ qt qt-creator
1
Possible duplicate of Get current working directory in a Qt application
– m.s.
Jun 17 '16 at 18:14
1
So you want current directory at build time? Or runtime?
– hyde
Jun 17 '16 at 18:20
There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
– kmx78
Jun 17 '16 at 20:17
1
@kmx78 Paths set at build time sound like a bad time.
– Cubic
Jun 17 '16 at 20:20
I'm not trying to set a path, just trying to have access to a path.
– kmx78
Jun 17 '16 at 20:25
add a comment |
In Qt Creator in the Projects Build Settings, you can set environment variables so that once you're done your system does not retain the env vars that were set while developing. The environment variable I have would contain the path of the developer's code. I would like to not have each developer have to input this value. I have read that there's a .pro.shared that can contain this information, however since the environment variable will point to the user's code directory and will be different for each user, it would not work for this.
What is the best way to do this?
I tried variations of the following:
MyProject.pro
DEFINES += MY_VAR=$PWD
main.cpp
#ifdef MY_VAR
qDebug() << "printing value: " << QString(MY_VAR);
#endif
Any suggestions are welcomed. The solution I'm looking for doesn't have to be a .pro file edit, as long as it is something that can be version controlled.
Not a duplicate question because...There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
c++ qt qt-creator
In Qt Creator in the Projects Build Settings, you can set environment variables so that once you're done your system does not retain the env vars that were set while developing. The environment variable I have would contain the path of the developer's code. I would like to not have each developer have to input this value. I have read that there's a .pro.shared that can contain this information, however since the environment variable will point to the user's code directory and will be different for each user, it would not work for this.
What is the best way to do this?
I tried variations of the following:
MyProject.pro
DEFINES += MY_VAR=$PWD
main.cpp
#ifdef MY_VAR
qDebug() << "printing value: " << QString(MY_VAR);
#endif
Any suggestions are welcomed. The solution I'm looking for doesn't have to be a .pro file edit, as long as it is something that can be version controlled.
Not a duplicate question because...There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
c++ qt qt-creator
c++ qt qt-creator
edited Jun 17 '16 at 20:19
kmx78
asked Jun 17 '16 at 18:11
kmx78kmx78
508
508
1
Possible duplicate of Get current working directory in a Qt application
– m.s.
Jun 17 '16 at 18:14
1
So you want current directory at build time? Or runtime?
– hyde
Jun 17 '16 at 18:20
There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
– kmx78
Jun 17 '16 at 20:17
1
@kmx78 Paths set at build time sound like a bad time.
– Cubic
Jun 17 '16 at 20:20
I'm not trying to set a path, just trying to have access to a path.
– kmx78
Jun 17 '16 at 20:25
add a comment |
1
Possible duplicate of Get current working directory in a Qt application
– m.s.
Jun 17 '16 at 18:14
1
So you want current directory at build time? Or runtime?
– hyde
Jun 17 '16 at 18:20
There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
– kmx78
Jun 17 '16 at 20:17
1
@kmx78 Paths set at build time sound like a bad time.
– Cubic
Jun 17 '16 at 20:20
I'm not trying to set a path, just trying to have access to a path.
– kmx78
Jun 17 '16 at 20:25
1
1
Possible duplicate of Get current working directory in a Qt application
– m.s.
Jun 17 '16 at 18:14
Possible duplicate of Get current working directory in a Qt application
– m.s.
Jun 17 '16 at 18:14
1
1
So you want current directory at build time? Or runtime?
– hyde
Jun 17 '16 at 18:20
So you want current directory at build time? Or runtime?
– hyde
Jun 17 '16 at 18:20
There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
– kmx78
Jun 17 '16 at 20:17
There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
– kmx78
Jun 17 '16 at 20:17
1
1
@kmx78 Paths set at build time sound like a bad time.
– Cubic
Jun 17 '16 at 20:20
@kmx78 Paths set at build time sound like a bad time.
– Cubic
Jun 17 '16 at 20:20
I'm not trying to set a path, just trying to have access to a path.
– kmx78
Jun 17 '16 at 20:25
I'm not trying to set a path, just trying to have access to a path.
– kmx78
Jun 17 '16 at 20:25
add a comment |
1 Answer
1
active
oldest
votes
I just happened to have stumbled across the solution somewhere else. In case anyone else is still looking, it turns out that all I needed were 3 back slashes for quotes in my .pro file:
DEFINES += MY_VAR=\"$$PWD\"
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f37887833%2faccessing-pwd-in-c-code%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
I just happened to have stumbled across the solution somewhere else. In case anyone else is still looking, it turns out that all I needed were 3 back slashes for quotes in my .pro file:
DEFINES += MY_VAR=\"$$PWD\"
add a comment |
I just happened to have stumbled across the solution somewhere else. In case anyone else is still looking, it turns out that all I needed were 3 back slashes for quotes in my .pro file:
DEFINES += MY_VAR=\"$$PWD\"
add a comment |
I just happened to have stumbled across the solution somewhere else. In case anyone else is still looking, it turns out that all I needed were 3 back slashes for quotes in my .pro file:
DEFINES += MY_VAR=\"$$PWD\"
I just happened to have stumbled across the solution somewhere else. In case anyone else is still looking, it turns out that all I needed were 3 back slashes for quotes in my .pro file:
DEFINES += MY_VAR=\"$$PWD\"
answered Nov 1 '17 at 22:29
kmx78kmx78
508
508
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f37887833%2faccessing-pwd-in-c-code%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Possible duplicate of Get current working directory in a Qt application
– m.s.
Jun 17 '16 at 18:14
1
So you want current directory at build time? Or runtime?
– hyde
Jun 17 '16 at 18:20
There are folders in my app's code that are relative to the application's directory. Because the end user's application and a developer's application will be in different places, I want to allow the developer to use directories that are relative to where their code resides. So I want to set the variable at build time and use it at run time.
– kmx78
Jun 17 '16 at 20:17
1
@kmx78 Paths set at build time sound like a bad time.
– Cubic
Jun 17 '16 at 20:20
I'm not trying to set a path, just trying to have access to a path.
– kmx78
Jun 17 '16 at 20:25