Push repository to new remote, one commit at the time
up vote
1
down vote
favorite
I'm moving a repository to a new host, and for unfortunate historal reasons, a lot of large files are checked in (cocoa pods, images)
While I've used Git BFS to reduce the size to 940mb (from 2.4GB), it's still not enough to support the push to our internal deployment of BitBucket server.
So I'd like to push the commits one by one, from a specific point in history. The repository was originally ported from SVN, and broke the Git tree at that point in time (there's a graph that have a solid break about 5 years back)
It's only 4000 commits, so it's a reasonable amount to push one by one, but I can't find a good way to push from a given ref, rather than to a given ref.
So, is there any way to push from commit-hash to commit-hash (in my case, HEAD) to a (new) remote endpoint?
git bitbucket-server
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
add a comment |
up vote
1
down vote
favorite
I'm moving a repository to a new host, and for unfortunate historal reasons, a lot of large files are checked in (cocoa pods, images)
While I've used Git BFS to reduce the size to 940mb (from 2.4GB), it's still not enough to support the push to our internal deployment of BitBucket server.
So I'd like to push the commits one by one, from a specific point in history. The repository was originally ported from SVN, and broke the Git tree at that point in time (there's a graph that have a solid break about 5 years back)
It's only 4000 commits, so it's a reasonable amount to push one by one, but I can't find a good way to push from a given ref, rather than to a given ref.
So, is there any way to push from commit-hash to commit-hash (in my case, HEAD) to a (new) remote endpoint?
git bitbucket-server
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
I don't know of any way to push a commit directly but you might be able to create a new temporary branch, which you can reset to a commit, push the branch, reset it to the next commit, push it, and so on, until you're at master's commit, at which point you'd just have to push master and delete the temporary branch.
– tkausl
Nov 21 at 19:33
@tkauslgit push origin HEAD~1:refs/head/masterwill push the commit before the current one to origin/master (and only that commit), but it doesn't work for a range of commits :/ So essentially I'm looking for a smart way of doing this for a full range.
– Claus Jørgensen
Nov 21 at 19:44
Right, I forgot aboutfrom:tosyntax... Well even if it doesn't work with a range, you could write a simple script to push one commit at a time.git log --pretty=format:"%h" --reverse origin/master..mastergives you a list of commits origin/master is missing, iterate over them and push them one at a time.
– tkausl
Nov 21 at 19:50
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I'm moving a repository to a new host, and for unfortunate historal reasons, a lot of large files are checked in (cocoa pods, images)
While I've used Git BFS to reduce the size to 940mb (from 2.4GB), it's still not enough to support the push to our internal deployment of BitBucket server.
So I'd like to push the commits one by one, from a specific point in history. The repository was originally ported from SVN, and broke the Git tree at that point in time (there's a graph that have a solid break about 5 years back)
It's only 4000 commits, so it's a reasonable amount to push one by one, but I can't find a good way to push from a given ref, rather than to a given ref.
So, is there any way to push from commit-hash to commit-hash (in my case, HEAD) to a (new) remote endpoint?
git bitbucket-server
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
I'm moving a repository to a new host, and for unfortunate historal reasons, a lot of large files are checked in (cocoa pods, images)
While I've used Git BFS to reduce the size to 940mb (from 2.4GB), it's still not enough to support the push to our internal deployment of BitBucket server.
So I'd like to push the commits one by one, from a specific point in history. The repository was originally ported from SVN, and broke the Git tree at that point in time (there's a graph that have a solid break about 5 years back)
It's only 4000 commits, so it's a reasonable amount to push one by one, but I can't find a good way to push from a given ref, rather than to a given ref.
So, is there any way to push from commit-hash to commit-hash (in my case, HEAD) to a (new) remote endpoint?
git bitbucket-server
git bitbucket-server
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
asked Nov 21 at 19:31
Claus Jørgensen
22.1k967125
22.1k967125
I don't know of any way to push a commit directly but you might be able to create a new temporary branch, which you can reset to a commit, push the branch, reset it to the next commit, push it, and so on, until you're at master's commit, at which point you'd just have to push master and delete the temporary branch.
– tkausl
Nov 21 at 19:33
@tkauslgit push origin HEAD~1:refs/head/masterwill push the commit before the current one to origin/master (and only that commit), but it doesn't work for a range of commits :/ So essentially I'm looking for a smart way of doing this for a full range.
– Claus Jørgensen
Nov 21 at 19:44
Right, I forgot aboutfrom:tosyntax... Well even if it doesn't work with a range, you could write a simple script to push one commit at a time.git log --pretty=format:"%h" --reverse origin/master..mastergives you a list of commits origin/master is missing, iterate over them and push them one at a time.
– tkausl
Nov 21 at 19:50
add a comment |
I don't know of any way to push a commit directly but you might be able to create a new temporary branch, which you can reset to a commit, push the branch, reset it to the next commit, push it, and so on, until you're at master's commit, at which point you'd just have to push master and delete the temporary branch.
– tkausl
Nov 21 at 19:33
@tkauslgit push origin HEAD~1:refs/head/masterwill push the commit before the current one to origin/master (and only that commit), but it doesn't work for a range of commits :/ So essentially I'm looking for a smart way of doing this for a full range.
– Claus Jørgensen
Nov 21 at 19:44
Right, I forgot aboutfrom:tosyntax... Well even if it doesn't work with a range, you could write a simple script to push one commit at a time.git log --pretty=format:"%h" --reverse origin/master..mastergives you a list of commits origin/master is missing, iterate over them and push them one at a time.
– tkausl
Nov 21 at 19:50
I don't know of any way to push a commit directly but you might be able to create a new temporary branch, which you can reset to a commit, push the branch, reset it to the next commit, push it, and so on, until you're at master's commit, at which point you'd just have to push master and delete the temporary branch.
– tkausl
Nov 21 at 19:33
I don't know of any way to push a commit directly but you might be able to create a new temporary branch, which you can reset to a commit, push the branch, reset it to the next commit, push it, and so on, until you're at master's commit, at which point you'd just have to push master and delete the temporary branch.
– tkausl
Nov 21 at 19:33
@tkausl
git push origin HEAD~1:refs/head/master will push the commit before the current one to origin/master (and only that commit), but it doesn't work for a range of commits :/ So essentially I'm looking for a smart way of doing this for a full range.– Claus Jørgensen
Nov 21 at 19:44
@tkausl
git push origin HEAD~1:refs/head/master will push the commit before the current one to origin/master (and only that commit), but it doesn't work for a range of commits :/ So essentially I'm looking for a smart way of doing this for a full range.– Claus Jørgensen
Nov 21 at 19:44
Right, I forgot about
from:to syntax... Well even if it doesn't work with a range, you could write a simple script to push one commit at a time. git log --pretty=format:"%h" --reverse origin/master..master gives you a list of commits origin/master is missing, iterate over them and push them one at a time.– tkausl
Nov 21 at 19:50
Right, I forgot about
from:to syntax... Well even if it doesn't work with a range, you could write a simple script to push one commit at a time. git log --pretty=format:"%h" --reverse origin/master..master gives you a list of commits origin/master is missing, iterate over them and push them one at a time.– tkausl
Nov 21 at 19:50
add a comment |
1 Answer
1
active
oldest
votes
up vote
1
down vote
accepted
As I suggested in the comments, a little script to push one commit at a time might work. From the server's point of view it would look like one were working on the project, commiting and pushing continuously.
In bash, this should work:
for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do
git push origin $c:master
done
--first-parent is needed so it doesn't break on merge's. I tried it locally and this is what I got:
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --graph --decorate
* d2d3264 (HEAD -> master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc (origin/master) initial commit
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --pretty=format:"%h" --reverse --first-parent origin/master..master
6765170
ca354e5
f3c54df
9171144
d2d3264
tobi@TOBIAS-PC:/mnt/d/test/git/r$ for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do git push origin $c:master; done
Counting objects: 3, done.
Writing objects: 100% (3/3), 235 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
c1873cc..6765170 6765170 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
6765170..ca354e5 ca354e5 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
ca354e5..f3c54df f3c54df -> master
Counting objects: 8, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (6/6), done.
Writing objects: 100% (8/8), 762 bytes | 0 bytes/s, done.
Total 8 (delta 0), reused 0 (delta 0)
To ../b
f3c54df..9171144 9171144 -> master
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 274 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
9171144..d2d3264 d2d3264 -> master
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --decorate --graph
* d2d3264 (HEAD -> master, origin/master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc initial commit
You might also want to add a sleep in case the server gets overwhelmed by all these pushes to give it some time to process all this data; I don't really know whether it does anything further than just storing it on the disk, it might index it or something.
answered Nov 21 at 20:15
tkausl
7,96912042
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
accepted
As I suggested in the comments, a little script to push one commit at a time might work. From the server's point of view it would look like one were working on the project, commiting and pushing continuously.
In bash, this should work:
for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do
git push origin $c:master
done
--first-parent is needed so it doesn't break on merge's. I tried it locally and this is what I got:
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --graph --decorate
* d2d3264 (HEAD -> master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc (origin/master) initial commit
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --pretty=format:"%h" --reverse --first-parent origin/master..master
6765170
ca354e5
f3c54df
9171144
d2d3264
tobi@TOBIAS-PC:/mnt/d/test/git/r$ for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do git push origin $c:master; done
Counting objects: 3, done.
Writing objects: 100% (3/3), 235 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
c1873cc..6765170 6765170 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
6765170..ca354e5 ca354e5 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
ca354e5..f3c54df f3c54df -> master
Counting objects: 8, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (6/6), done.
Writing objects: 100% (8/8), 762 bytes | 0 bytes/s, done.
Total 8 (delta 0), reused 0 (delta 0)
To ../b
f3c54df..9171144 9171144 -> master
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 274 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
9171144..d2d3264 d2d3264 -> master
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --decorate --graph
* d2d3264 (HEAD -> master, origin/master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc initial commit
You might also want to add a sleep in case the server gets overwhelmed by all these pushes to give it some time to process all this data; I don't really know whether it does anything further than just storing it on the disk, it might index it or something.
answered Nov 21 at 20:15
tkausl
7,96912042
add a comment |
up vote
1
down vote
accepted
As I suggested in the comments, a little script to push one commit at a time might work. From the server's point of view it would look like one were working on the project, commiting and pushing continuously.
In bash, this should work:
for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do
git push origin $c:master
done
--first-parent is needed so it doesn't break on merge's. I tried it locally and this is what I got:
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --graph --decorate
* d2d3264 (HEAD -> master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc (origin/master) initial commit
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --pretty=format:"%h" --reverse --first-parent origin/master..master
6765170
ca354e5
f3c54df
9171144
d2d3264
tobi@TOBIAS-PC:/mnt/d/test/git/r$ for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do git push origin $c:master; done
Counting objects: 3, done.
Writing objects: 100% (3/3), 235 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
c1873cc..6765170 6765170 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
6765170..ca354e5 ca354e5 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
ca354e5..f3c54df f3c54df -> master
Counting objects: 8, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (6/6), done.
Writing objects: 100% (8/8), 762 bytes | 0 bytes/s, done.
Total 8 (delta 0), reused 0 (delta 0)
To ../b
f3c54df..9171144 9171144 -> master
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 274 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
9171144..d2d3264 d2d3264 -> master
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --decorate --graph
* d2d3264 (HEAD -> master, origin/master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc initial commit
You might also want to add a sleep in case the server gets overwhelmed by all these pushes to give it some time to process all this data; I don't really know whether it does anything further than just storing it on the disk, it might index it or something.
answered Nov 21 at 20:15
tkausl
7,96912042
add a comment |
up vote
1
down vote
accepted
up vote
1
down vote
accepted
As I suggested in the comments, a little script to push one commit at a time might work. From the server's point of view it would look like one were working on the project, commiting and pushing continuously.
In bash, this should work:
for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do
git push origin $c:master
done
--first-parent is needed so it doesn't break on merge's. I tried it locally and this is what I got:
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --graph --decorate
* d2d3264 (HEAD -> master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc (origin/master) initial commit
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --pretty=format:"%h" --reverse --first-parent origin/master..master
6765170
ca354e5
f3c54df
9171144
d2d3264
tobi@TOBIAS-PC:/mnt/d/test/git/r$ for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do git push origin $c:master; done
Counting objects: 3, done.
Writing objects: 100% (3/3), 235 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
c1873cc..6765170 6765170 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
6765170..ca354e5 ca354e5 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
ca354e5..f3c54df f3c54df -> master
Counting objects: 8, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (6/6), done.
Writing objects: 100% (8/8), 762 bytes | 0 bytes/s, done.
Total 8 (delta 0), reused 0 (delta 0)
To ../b
f3c54df..9171144 9171144 -> master
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 274 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
9171144..d2d3264 d2d3264 -> master
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --decorate --graph
* d2d3264 (HEAD -> master, origin/master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc initial commit
You might also want to add a sleep in case the server gets overwhelmed by all these pushes to give it some time to process all this data; I don't really know whether it does anything further than just storing it on the disk, it might index it or something.
answered Nov 21 at 20:15
tkausl
7,96912042
As I suggested in the comments, a little script to push one commit at a time might work. From the server's point of view it would look like one were working on the project, commiting and pushing continuously.
In bash, this should work:
for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do
git push origin $c:master
done
--first-parent is needed so it doesn't break on merge's. I tried it locally and this is what I got:
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --graph --decorate
* d2d3264 (HEAD -> master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc (origin/master) initial commit
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --pretty=format:"%h" --reverse --first-parent origin/master..master
6765170
ca354e5
f3c54df
9171144
d2d3264
tobi@TOBIAS-PC:/mnt/d/test/git/r$ for c in $(git log --pretty=format:"%h" --reverse --first-parent origin/master..master); do git push origin $c:master; done
Counting objects: 3, done.
Writing objects: 100% (3/3), 235 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
c1873cc..6765170 6765170 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
6765170..ca354e5 ca354e5 -> master
Counting objects: 3, done.
Writing objects: 100% (3/3), 244 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
ca354e5..f3c54df f3c54df -> master
Counting objects: 8, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (6/6), done.
Writing objects: 100% (8/8), 762 bytes | 0 bytes/s, done.
Total 8 (delta 0), reused 0 (delta 0)
To ../b
f3c54df..9171144 9171144 -> master
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 274 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../b
9171144..d2d3264 d2d3264 -> master
tobi@TOBIAS-PC:/mnt/d/test/git/r$ git log --oneline --decorate --graph
* d2d3264 (HEAD -> master, origin/master) asdaskdj
* 9171144 Merge branch 'something'
|
| * f85e25e (something) opjsdfk
| * 069b6f1 bla
* | f3c54df kjsdaflk
* | ca354e5 kjsdaflk
|/
* 6765170 asdf
* c1873cc initial commit
You might also want to add a sleep in case the server gets overwhelmed by all these pushes to give it some time to process all this data; I don't really know whether it does anything further than just storing it on the disk, it might index it or something.
answered Nov 21 at 20:15
tkausl
7,96912042
edited Nov 21 at 20:21
answered Nov 21 at 20:15
tkausl
7,96912042
answered Nov 21 at 20:15
tkausl
7,96912042
answered Nov 21 at 20:15
tkausl
7,96912042
7,96912042
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53419308%2fpush-repository-to-new-remote-one-commit-at-the-time%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I don't know of any way to push a commit directly but you might be able to create a new temporary branch, which you can reset to a commit, push the branch, reset it to the next commit, push it, and so on, until you're at master's commit, at which point you'd just have to push master and delete the temporary branch.
– tkausl
Nov 21 at 19:33
@tkausl
git push origin HEAD~1:refs/head/masterwill push the commit before the current one to origin/master (and only that commit), but it doesn't work for a range of commits :/ So essentially I'm looking for a smart way of doing this for a full range.– Claus Jørgensen
Nov 21 at 19:44
Right, I forgot about
from:tosyntax... Well even if it doesn't work with a range, you could write a simple script to push one commit at a time.git log --pretty=format:"%h" --reverse origin/master..mastergives you a list of commits origin/master is missing, iterate over them and push them one at a time.– tkausl
Nov 21 at 19:50