Angular validation messages appears after reset() form
I try to get the form to be clear without the validation error messages after calling reset().
my form looks clean on load, and that is expected:
however, if the user pressed the register button, and there was an error, I trigger the form.reset() method. I expect the form to look like the above picture, since the touch, pristine, dirty props are all as when the form is initially loaded.
but instead, it clears the values, but shows me the validation error.
Can anyone help me please get it to the initial state, a clear form without the validation errors shows up?
This is a reactive form. let me know if you need more information. Thanks!
angular forms angular-reactive-forms angular-validation
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
add a comment |
I try to get the form to be clear without the validation error messages after calling reset().
my form looks clean on load, and that is expected:
however, if the user pressed the register button, and there was an error, I trigger the form.reset() method. I expect the form to look like the above picture, since the touch, pristine, dirty props are all as when the form is initially loaded.
but instead, it clears the values, but shows me the validation error.
Can anyone help me please get it to the initial state, a clear form without the validation errors shows up?
This is a reactive form. let me know if you need more information. Thanks!
angular forms angular-reactive-forms angular-validation
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
add a comment |
I try to get the form to be clear without the validation error messages after calling reset().
my form looks clean on load, and that is expected:
however, if the user pressed the register button, and there was an error, I trigger the form.reset() method. I expect the form to look like the above picture, since the touch, pristine, dirty props are all as when the form is initially loaded.
but instead, it clears the values, but shows me the validation error.
Can anyone help me please get it to the initial state, a clear form without the validation errors shows up?
This is a reactive form. let me know if you need more information. Thanks!
angular forms angular-reactive-forms angular-validation
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
I try to get the form to be clear without the validation error messages after calling reset().
my form looks clean on load, and that is expected:
however, if the user pressed the register button, and there was an error, I trigger the form.reset() method. I expect the form to look like the above picture, since the touch, pristine, dirty props are all as when the form is initially loaded.
but instead, it clears the values, but shows me the validation error.
Can anyone help me please get it to the initial state, a clear form without the validation errors shows up?
This is a reactive form. let me know if you need more information. Thanks!
angular forms angular-reactive-forms angular-validation
angular forms angular-reactive-forms angular-validation
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
edited Nov 25 '18 at 21:40
Roni Axelrad
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
asked Nov 25 '18 at 21:33
Roni AxelradRoni Axelrad
1158
1158
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
It looks like you are using Angular Materials.
If so ,you must reset FormGroupDirective too,only resetting the FormGroup is not enough.
private registerForm(fData: any,formDirective: FormGroupDirective): void {
formDirective.resetForm();
this.RegForm.reset();
}
<form [formGroup]="RegForm" #formDirective="ngForm"
(ngSubmit)="registerForm(RegForm,formDirective)">
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
add a comment |
Are you using something like this?
// Reactive Form
constructor(private _builder:FormBuilder) {
this.createForm();
}
createForm() {
this.form = this._builder.group({
key: this.value,
});
}
// Option 1
resetForm() {
this.form.reset();
}
// Option 2 - create form again
resetForm() {
this.createForm()
}
// Template Form
---- HTML ----
<form #myForm="ngForm"></form>
---- TS ----
@ViewChild('myForm') myForm;
resetForm() {
if (this.myForm) {
this.myForm.reset();
}
}
answered Nov 25 '18 at 22:17
MishalMishal
12
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53472222%2fangular-validation-messages-appears-after-reset-form%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
It looks like you are using Angular Materials.
If so ,you must reset FormGroupDirective too,only resetting the FormGroup is not enough.
private registerForm(fData: any,formDirective: FormGroupDirective): void {
formDirective.resetForm();
this.RegForm.reset();
}
<form [formGroup]="RegForm" #formDirective="ngForm"
(ngSubmit)="registerForm(RegForm,formDirective)">
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
add a comment |
It looks like you are using Angular Materials.
If so ,you must reset FormGroupDirective too,only resetting the FormGroup is not enough.
private registerForm(fData: any,formDirective: FormGroupDirective): void {
formDirective.resetForm();
this.RegForm.reset();
}
<form [formGroup]="RegForm" #formDirective="ngForm"
(ngSubmit)="registerForm(RegForm,formDirective)">
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
add a comment |
It looks like you are using Angular Materials.
If so ,you must reset FormGroupDirective too,only resetting the FormGroup is not enough.
private registerForm(fData: any,formDirective: FormGroupDirective): void {
formDirective.resetForm();
this.RegForm.reset();
}
<form [formGroup]="RegForm" #formDirective="ngForm"
(ngSubmit)="registerForm(RegForm,formDirective)">
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
It looks like you are using Angular Materials.
If so ,you must reset FormGroupDirective too,only resetting the FormGroup is not enough.
private registerForm(fData: any,formDirective: FormGroupDirective): void {
formDirective.resetForm();
this.RegForm.reset();
}
<form [formGroup]="RegForm" #formDirective="ngForm"
(ngSubmit)="registerForm(RegForm,formDirective)">
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
edited Nov 25 '18 at 22:34
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
answered Nov 25 '18 at 22:25
Victor RodnianskyVictor Rodniansky
4818
4818
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
add a comment |
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
Thanks !! that worked. I wasn't aware of the extra step if using angular meterial
– Roni Axelrad
Nov 25 '18 at 22:52
add a comment |
Are you using something like this?
// Reactive Form
constructor(private _builder:FormBuilder) {
this.createForm();
}
createForm() {
this.form = this._builder.group({
key: this.value,
});
}
// Option 1
resetForm() {
this.form.reset();
}
// Option 2 - create form again
resetForm() {
this.createForm()
}
// Template Form
---- HTML ----
<form #myForm="ngForm"></form>
---- TS ----
@ViewChild('myForm') myForm;
resetForm() {
if (this.myForm) {
this.myForm.reset();
}
}
answered Nov 25 '18 at 22:17
MishalMishal
12
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
add a comment |
Are you using something like this?
// Reactive Form
constructor(private _builder:FormBuilder) {
this.createForm();
}
createForm() {
this.form = this._builder.group({
key: this.value,
});
}
// Option 1
resetForm() {
this.form.reset();
}
// Option 2 - create form again
resetForm() {
this.createForm()
}
// Template Form
---- HTML ----
<form #myForm="ngForm"></form>
---- TS ----
@ViewChild('myForm') myForm;
resetForm() {
if (this.myForm) {
this.myForm.reset();
}
}
answered Nov 25 '18 at 22:17
MishalMishal
12
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
add a comment |
Are you using something like this?
// Reactive Form
constructor(private _builder:FormBuilder) {
this.createForm();
}
createForm() {
this.form = this._builder.group({
key: this.value,
});
}
// Option 1
resetForm() {
this.form.reset();
}
// Option 2 - create form again
resetForm() {
this.createForm()
}
// Template Form
---- HTML ----
<form #myForm="ngForm"></form>
---- TS ----
@ViewChild('myForm') myForm;
resetForm() {
if (this.myForm) {
this.myForm.reset();
}
}
answered Nov 25 '18 at 22:17
MishalMishal
12
Are you using something like this?
// Reactive Form
constructor(private _builder:FormBuilder) {
this.createForm();
}
createForm() {
this.form = this._builder.group({
key: this.value,
});
}
// Option 1
resetForm() {
this.form.reset();
}
// Option 2 - create form again
resetForm() {
this.createForm()
}
// Template Form
---- HTML ----
<form #myForm="ngForm"></form>
---- TS ----
@ViewChild('myForm') myForm;
resetForm() {
if (this.myForm) {
this.myForm.reset();
}
}
answered Nov 25 '18 at 22:17
MishalMishal
12
answered Nov 25 '18 at 22:17
MishalMishal
12
answered Nov 25 '18 at 22:17
MishalMishal
12
answered Nov 25 '18 at 22:17
MishalMishal
12
12
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
add a comment |
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
Thanks for your suggestion Mishal. The first answer worked for me.
– Roni Axelrad
Nov 25 '18 at 22:53
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53472222%2fangular-validation-messages-appears-after-reset-form%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
